Operation And Use; Refilling With Water - Beem Comfort de Luxe Manual De Instrucciones

EN

Operation and use

Switching on and using the
appliance
Insert the plug into the mains socket.
‹
Switch on the appliance by press-
‹
ing the on/off switch (4). The power
indicator (9) lights up red, the steam
ready indicator (5) lights up green and
the water in the tank is heated up.
When the operating temperature is
‹
reached, the steam ready indicator (5)
extinguishes. The appliance is ready
for use.
If necessary, unlock the steam
‹
switch (31) and set the steam quan-
tity.Press the steam switch. Direct the
steam jet at a cloth until the steam
flows out evenly.
Press down the steam switch and di-
‹
rect the steam jet towards the surface
to be cleaned.
NOTE
► The heater in the appliance switches
on and off frequently during use in
order to maintain the pressure in the
tank. The steam ready indicator lights
up green when the heater is switched
on.
BEEM - Elements of Lifestyle
Comfort de Luxe
Setting the steam flow
The steam flow is set with the steam flow
regulator (6).
Turn the steam flow regulator in a
‹
clockwise direction to decrease the
steam flow.
Turning completely to the right: steam-
ing is switched off completely.
Turn the steam flow regulator in an
‹
anti-clockwise direction to increase
the steam flow.
Locking/unlocking
the steam switch
Push the steam switch lock (30) to the
‹
right to lock the steam switch.
Push the steam switch lock (30) to the
‹
left to unlock the steam switch.

Refilling with water

Switch off the appliance and pull the
‹
plug out of the mains socket.
Press down the steam switch (31) un-
‹
til steam is no longer discharged.
Lock the steam switch.
‹
Fill the tank, see section
‹
water (page 30).
Switch on the appliance again, see
‹
section Switching on and using the
appliance (page 33).
Filling with
33