Publicidad
Idiomas disponibles
Idiomas disponibles
Fanaway Brisbane Installation Instructions
Fig. 6.5
Fig. 6.6
6. Insert the decorative cover (7) onto the down rod (6) to cover the down rod coupling housing (8).(
Fig.
)
6.5
7. Insert the canopy (5) over the down rod (6) and install the ball joint (2) and dowel pin (3) back onto
the down rod (6) and secure by tightening the set screws (4). (Fig. 6.5 and Fig. 6.6)
HANGING THE FAN
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling
mounting bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting
screws (F) provided with the outlet box and washers (E) provided with fan. Fig. 7
Fig. 8
Fig. 7
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned
on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.8
6 | P a g e
Publicidad
