Publicidad
Idiomas disponibles
Idiomas disponibles
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
1.
Pull out the mains plug, and close the water tap.
2.
Make sure that door and detergent dispenser are properly
closed.
3.
Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
water from the hoses, and fix them so that they cannot get
damaged during transport.
AFTER-SALES SERVICE
BEFORE CALLING THE AFTER-SALES SERVICE
1.
See if you can solve the problem by yourself with the help
of the suggestions given in the
IF AFTER THE ABOVE CHECKS THE FAULT STILL
OCCURS, GET IN TOUCH WITH THE NEAREST
AFTER-SALES SERVICE
To receive assistance, call the number shown on the warranty
booklet.
When contacting our Client After sales service, always specify:
•
a brief description of the fault;
•
the type and exact model of the appliance;
xxxxxxxxxxxx
TROUBLESHOOTING
4.
Refit the transport bolts. Follow the instructions for
removing the transport bolts in the "Installation Guide" in
reverse order.
Important: Do not transport the washing machine without
having fixed the transport bolts.
2.
Switch the appliance off and back on again to see if the
fault persists.
•
the service number (number after the word Service on the
rating plate).
•
your full address;
•
your telephone number.
If any repairs are required, please contact an authorised after-
sales service (to guarantee that original spare parts will be used
and repairs carried out correctly).
Publicidad
