MONOBLOCK UNIG
Smart Scenes is a powerful tool providing the option to customise the operation of the air
conditioner based both on conditions within the room and outside influences. This gives the user
the option of specifying much more intelligent actions. These are split into two catagories Scene
and Automation.
SCENE
Scene allows for a one touch button to be added to the Home screen. The button can be used to
change a number of settings in one go, and can change all the settings within the unit. A number
of scenes can easily be setup, allowing the user to easily change between a number of preset
configurations.
Below is an example of how to set up a scene:
1. Press on the Smart Scene
tab at the bottom of the Home
screen.
Casa 1
•
6. Once all the functions required have been added, press the Save button in the top right corner to
finalise and save your new Scene.
2. Press on the Plus in the top
right corner to add a smart scene.
Casa 1
4. Press the arrow next to
"Name" to input the name for
your Scene
Show on Home Page: Leave
this on if you require the scene
to be displayed as a button on
the Home Screen
Press the Blue Plus to add the
action required. Then select
the air conditioner from the list
of devices.
USER AND INSTALLATION MANUAL
10. SMART SCENES
3. Press on the Launch Tap-to-
Run to create a new Scene.
5. Chose the function, set the
value for the function, and then
press the arrow button in the
top left corner, to return to the
previous screen.
59