Wi-Fi Dongle Udage - ITALFARAD PFC144evo Manual De Uso


The WI-FI dongle offers WI-FI access point capability for connection to PC, Tablet or Smartphone. In addition to this
function it also offer the possibility to store and transfer a block of data from/to the PFC144evo regulator.

Insert the interface WI-FI into the IR port of PFC144evo regulator on the front plate.

Switch WI-FI dongle on by pressing the button for 2 sec.

Wait until the LINK LED becomes orange flashing.

Press 3 times consecutively and fast the dongle button.

At this point the display of the PFC144evo regulator shows the first of the 6 possible commands (D1...D6).

Press
E

Press
N
Press once again

The following table lists the possible commands:
COD COMMAND
SETUP DEVICE CX02
D1
SETUP CX02 DEVICE
D2
CLONE DEVICE CX02
D3
CLONE CX02 DEVICE
D4
D5 INFO DATA CX02
D6 EXIT

For additional details see WI-FI dongle operating manual..
Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com
to select the desired command.
to execute the selected command. The unit will prompt for a confirmation (OK?).
to confirm or
DESCRIPTION
Copies Setup settings from PFC144evo regulator to WI-FI dongle.
Copies Setup settings from WI-FI dongle to PFC144evo regulator.
Copies Setup settings and working data from PFC144evo regulator to WI-FI dongle.
Copies Setup settings and working data from WI-FI dongle to PFC144evo regulator.
Shows information about data stored into WI-FI dongle.
Exits from dongle menu.
ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy
WI-FI dongle usage
to cancel.
58