·
Do not block or insert any objects into any openings of the product. Keep air inlet free of lint.
·
Do not leave open flame sources, candles, cigarettes or similar on the product. Do not throw flammable
objects into the toilet.
·
Do not bend, pull or twist the power cable.
·
Avoid connecting any other electrical appliance to the same socket as this toilet.
·
Persons undergoing medical treatment or therapy in these body areas should consult with their doctor before using these products.
·
If the temperature in the bath is or will be below 0°C, the tank and toilet must be emptied in order to prevent the product from freezing and
the pipes from bursting, which could also lead to water leakage.
·
In case the product will not be used for a long period of time, disconnect the product from the power supply and empty the tank.
2.4
SEAT AND COVER
·
The product is supplied as standard with softclosing seat and cover.
·
Do not press any of these parts by hand as this may damage the functioning of the shock absorber (the parts that facilitate the soft closing of the seat
and cover).
·
Do not place loads and objects on the toilet seat. Do not climb on top of the seat.
03
START UP
3.1
FIRST STEPS
Insert batteries in the remote control.
Open the water supply valve.
Connect to the main supply or plugg the
socket.
3.2
GENERAL CONSIDERATIONS
When sitting on the seat of the toilet
·
Hot water preparation starts. The different functions can be activated
at any time, but if it is activated too quickly it will not have had time to
preheat to the set temperature, so a minimum preheating time of 30
seconds is recommended from the time the user sits down until any
water function is activated.
·
The green light on the side button of the toilet is activated.
·
Basic settings are automatically activated
·
Shower/wash functionality is activated
1
Standing up from the seat
·
Shower/wash functionality is deactivated
·
Drying functionality is deactivated
·
The head is rinsed and collected in an 8-second wash.
2
3
ON
21