Mizu RADA Manual De Funcionamento página 23

4.1.3 Hot / cold water massage
Prerequisite: Sitting on the toilet is required.
Press the key with
The water temperature alternates rhythmically between room temperature water and hot water (in the current setting).
This massage is not available in Auto mode. During the use of this function, following settings are allowed:
· Water temperature
· Water pressure
· Adjustment of the Nozzle position to suit to user
To stop the function press the central Stop/Stop button
The massage stops after 2 minutes if no button is pressed from the start of the main wash function.
If another function is pressed while the massage is running, the massage stops and the selected function is activated.
4.1.4 Autofunction
Prerequisite: Sitting on the toilet is required.
Press the key with the symbol
An Automatic washing programme is activated. This programme consists of Rear Wash with a duration of 2 minutes and finishes drying for 3
minutes. Then programme ends.
The programme can be stopped at any time by pressing the button.
During the use of this function, following settings are allowed
· Water temperature
· Water pressure
· Nozzle position adjustment to suit to user.
If another function is pressed while the programme is running, the programme stops and the selected function is activated.
This programme is recommended for use by the elderly or people with reduced mobility as it facilitates total cleaning without having to
make any movements.
4.1.5 ChildWashfunction
Prerequisite: It is necessary to be seated on the toilet and to have started one of the washing functions, either perineal or anal, beforehand.
To do this, the washing button must be pressed for a long time to activate the child wash. While the toilet remembers the water temperature
and intensity of the previous wash in the rear wash or female wash functions, by activating the child function, the toilet will always start at the
lowest water temperature and intensity to make it easier for children to use.
All settings (water temperature and Nozzle position) can be adjusted during the baby wash. The water pressure cannot be adjusted.
When the child mode ends and is used again, the toilet defaults back to the lowest water temperature and pressure regardless of the flushing
mode selected.
the symbol after one of the washing functions has been started. This function does not work independently.
on the remote control or on the side panel.
23