Mizu RADA Manual De Funcionamento página 22

USER MANUAL | RADA | ISLA | ENGLISH
04 FUNCTIONS
VIA THE REMOTE CONTROL
4.1
4.1.1 Anal/rearwashing
Prerequisite: Sitting on the toilet is required.
Press the key with the symbol
A short pressure activates the adult back wash, while a longer pressure activates the child wash. The blue light on the side button is activated.
The toilet has a memory, starting at the last position of the Nozzle, last water intensity and last set temperature. The water jet comes out
through 3 nozzles forming a silk water jet covering a larger surface area.
The start of the washing function is always in the oscillating mode (forward-backward movement of the Nozzle). When the function is active,
pressing the same button again switches the Nozzle to the static position. Pressing it again returns to the oscillating function.
At the beginning of the flushing, a self-cleaning of the Nozzle takes place, which in turn replaces the cold water in the pipes to avoid
discomfort.
During the use of this function it is allowed to adjust:
· Water temperature
· Water pressure
· Nozzle position adjustment to suit to user
To stop the function, press the central button
function is deactivated after 2 seconds.
Washing stops after 2 minutes if no button is pressed.
At the end of the process and while the Nozzle is being stored, a self-cleaning procedure is carried out on the Nozzle.
If another function is pressed while the wash is running, the wash stops and the selected function is activated.
4.1.2 Perinealorfemalewashing
Prerequisite: Sitting on the toilet is required.
Press the key with the symbol
Short pressure activates the female wash. The pink/purple light on the side button of the toilet is activated.
The Nozzle is activated in a more advanced position for feminine cleansing. In addition, the water comes out through a different duct to
the anal wash for greater hygiene. The water jet comes out through 4 nozzles forming a silky water jet covering the área in a smoother way.
At the beginning of the flushing, a self-cleaning of the Nozzle takes place, which in turn replaces the cold water in the pipes to avoid
discomfort.
The toilet has a memory and starts at the last set nozzle position, last set water intensity and last set temperature.
The start of the washing function is always in the oscillating mode (forward-backward movement of the Nozzle). When the function is active,
pressing the same button again switches the Nozzle to the static position. Pressing it again returns to the oscillating function.
During the use of this function it is allowed to adjust:
· Water temperature
· Water pressure
· Nozzle position adjustment to suit the user
To stop the function press the central Stop/Stop button
Washing stops after 2 minutes if no button is pressed.
At the end of the process and while the Nozzle is being stored, a self-cleaning procedure is carried out on the Nozzle.
If another function is pressed while the wash is in operation, the wash stops and the selected function
22
on the remote control or on the side panel. If the user stands up from the toilet, the
on the remote control or on the side panel.