Publicidad
Idiomas disponibles
Idiomas disponibles
6. USE INSTRUCTIONS
FIRST STEPS:
1. Take the equipment out of its packaging and check that all the parts are
there: air cooler, remote control and user manual.
2. Install the wheels by inserting them into the lower part of the equipment. The
wheels with brakes are in the front.
3. Insert the battery into the remote control.
4. Connect the equipment to a power outlet with the appropriate voltage. The
device will beep and go into Stand-by mode.
Notes:
- To avoid a short circuit, do not plug the equipment with wet hands.
- Make sure that the plug is securely plugged into its housing.
5. Fill the water tank if you want to use the equipment as an air conditioner:
- The water level in the tank must be maintained between the MAX and MIN
marks on the display. Avoid overfilling.
- It is possible that, after a few hours of use, the water in the tank takes on a
certain odor/color. If so, it is recommended to change the water and clean the
tank more frequently.
CONTROL FUNCTIONS:
1. ON/OFF: In Stand-by mode, press this button and the device will start in 3
seconds. Press the button again to turn it off.
2. NORMAL: Changes the speed within the normal mode between LOW -
MEDIUM - HIGH. The selected speed will be shown on the display for 5 seconds.
3. SLEEP: Change the speed within sleep mode between LOW - MEDIUM -
HIGH. The selected speed will be shown on the display for 5 seconds.
4. L&R SWING: Activates/deactivates automatic horizontal air swing.
5. U&D SWING: Activates/deactivates the automatic vertical air swing.
10
Publicidad
