Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
The declared values can also be used for a preliminary exposure assessment. WARNING. Vibration levels
may di er from the declared value, depending on how the tool is used.
The right conditions for users should be based on actual conditions, taking into account all parts of the
operating cycle, such as when the tool is switched o and idle time, in addition to the time when the
power switch is pressed .
Special safety instructions for cordless impact wrench
Only connect the charger to a 110V power point. Use only the original charger. Verify that the main
power is turned o before working on walls, oors, or doors. Use a metal detector to check that there are
no electrical cables, gas, and / or water pipes in the work area. Consult a licensed electrician if in doubt.
The power tool and drill can become very hot during use.
Allow the power tool to cool down. Wear safety gloves.
Additional safety instructions
Hold the power tool by the insulated gripping surfaces when working with parts of the bolted joint or
the tool may come into contact with hidden power cords or its own power cord. Contact with a live wire
will cause the metal parts of the tool to also become a risk of electric shock.
Secure the workpiece with a clamp, pliers, or screws. This makes the job safer and makes it possible to
hold it with both hands.
Warning:
Be aware of the risk that being inattentive or careless can cause when you begin to get used to using the
tool. A moment of inattention when using a power tool can cause serious personal injury.
Service
The power tool should only be repaired by quali ed personnel using original spare parts. This will ensure
that the power tool remains safe to use.
6