Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
Clean the tool and accessory slits after each use with a brush and cloth.
Accumulated contamination in hard-to-reach areas can be removed with compressed air.
Always check after each use that the accessories are not damaged.
Remove the accessories from the tool after each use and clean the unit.
WARNING:
Brake uid, gasoline, mineral oil, and petroleum products must not come into contact with the plastic
parts of the power tool. This type of product can damage or distort plastic.
WARNING: Always wear safety glasses that t against the face and with side protection when using com-
pressed air to clean the power tool. When doing very dusty work, you should also wear a dust mask.
Transport and storage
Clean the tool according to the instructions, allowing it to dry completely.
If the tool is not used for a long period of time, it must be stored in the original packaging.
Store the tool in a dry, well-ventilated place out of the reach of children.
Always turn o the tool before transporting.
Always load the handle tool specially designed for this purpose.
Make sure that the tool is not at risk of falling or being exposed to vibrations and shocks during transport,
especially if the tool is to be transported by car or other vehicle.
10