EUROM DryBest 10 Manual Del Usuario página 23

No. Description
2 Water tank
3 Filter
Control panel and display
The display usually shows the humidity in the room. If you set a desired humidity, the set
humidity flashes on the display for a few seconds. If you use the timer to set an on or off time,
the display flashes the set number of hours for a few seconds. If the humidity is less than 35%,
LO (low) is displayed and the device will remain inactive. If the humidity is higher than 95%, HI
(high) is displayed.
DryBest 10 control panel
1. Display
2. Compressor indication light
3. WATER FULL indication light
4. POWER button
5. Air humidity DOWN button
6. Air humidity UP button
7. TIMER button
8. TIMER indication light
9. DEFROST indication light
DryBest 20 control panel
1. Display
2. Air humidity DOWN button
3. TIMER indication light
4. POWER indication light
5. POWER button
6. TIMER button
7. Water reservoir full indication light
8. SPEED button
9. Laundry drying function button
10. Laundry drying function indication light
11. Fan speed low indication light
12. Fan speed high indication light
13. Air humidity UP button
No. Description
5 Handle
Figure 15.
Figure 16.
23