Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning of filter media :
- Clean the filter media with clean water and return them to their respective baskets.
- Reposition the baskets in the order in which they were placed in the filter.
- The handle on the last tray must be positioned in the correct axis.
➔ Motor assembly :
-
Place the motor on the filter housing.
-
Make sure the motor inlet tube is properly connected with the filter basket tube containing the
ceramic noodles.
-
Once the motor is properly installed, lock with the safety tabs.
➔ Installation of the connection block :
-
Press the latch located between the two inlets (drawing 1) above and turn it to the right.
-
Position it on the filter motor (drawing 2) and lock it by bringing the latch between the two inlets to
the center (drawing 3).
-
Connect the inlet tube and the outlet tube and lock with the nuts (drawing 4).
-
Push the handle up to lock the adapter to the base (drawing 5).
6
Publicidad
