Publicidad
Idiomas disponibles
Idiomas disponibles
5. Do not overreach hand. Keep the balance for the feet and body. In this way, the power tool can be
controlled very well for the unexpected situations.
6. Dress properly. Do not wear the loose clothing or jewelery. Keep your hair, clothing and gloves away
from moving parts. And the loose clothes, accessories, or long hair can be caught in moving parts.
7. Ensure that the link is proper to be used if any equipment to connect with the cuttings discharging device
and the dust collection device, which can reduce dust related hazards
D. Usage and precaution of power tool
1. Do not abuse the power tool, and choose the correct power tool for the application. And the job would
be more effective and safe if the power tool with the appropriate rated value has been chosen.
2. The power tool can not be used if it is not possible for the switch to connect or disconnect the power.
And the power tool which can not be controlled by the switch is dangerous, and it must be repaired.
3. The power or the battery box must be disconnected before any adjustments, changing accessories, or
storing power tools, which may reduce the risk of unexpected start.
4. Keep the idle power tools out of the reach of children, the operator who is unfamiliar with the power tool
or these instructions can not operate the power tool. And it is dangerous for the untrained users to
operate the power tool.
5. Maintenance of power tools, check the misalignment or the block of moving parts, the damage of
accessories and the other conditions to impact on the operation of power tools. The power tools must
be repaired before the usage if any damage. And a lot of accidents are caused by the poorly maintained
power tools
6. Keep cutting tools sharp and clean. Well-maintained tools with sharp cutting edge are not easy to be
blocked and are easier to be controlled.
7. Operate the power tool, accessories and the blade of tool etc in accordance with the instructions, the
manner required for the particular type of power tool, working conditions and the concrete job. The
power tool for operations inconsistent with the requirements may result in dangerous situations.
E. Repair
1. Send the power tool to the qualified person to repair with the identical replacement parts only, which can
ensure the safety of the maintenance of the power tool.
Pay attention to the power and voltage in case of the electrical connection. Be sure that the voltage of
power supply is the same as the one indicated on the nameplate. It is dangerous for the operator and
the power tool when the supply voltage is higher than the voltage required by tools. Therefore, it is
prohibited to plug in before confirm voltage supply. Conversely, it will be harmful to the motor when the
supply voltage is lower than the required voltage of electric tools.
General Safety Warnings of Grinder Operation
a) The power tool is used to realize the grinder functions, read all safety warnings, illustrations and regulations
as the following provided with the power tool to avoid the electric shock, fire and / or serious injury.
b) The other operation is not recommended to use for the power tool, such as sanding, brushing, polishing or
cutting operations. The operation out of the function as specified may be dangerous and cause the
personal injury.
c) The accessories which is not recommended and designed specially by the tool manufacturer are prohibited
to use. Otherwise, the safe operation of your power tool can not be guaranteed.
2
Keep Working
Publicidad
