3. TRANSPORT, PACKAGING AND STORAGE
3.2 Inspection following transport
Verification of the absence of damage and the completeness of the device must be carried out upon receipt
of the package. If transport damage is identified, refuse or accept the delivered product only with reservation
*. A complaint detailing the defects noted must subsequently be made. The collection of damages is only
possible in the event of a complaint made within the stipulated time limits, i.e. 24-48 hours maximum.
* written on the carrier's paper or digital delivery notes.
3.2 Packaging
The packaging of the device must be kept in the event of moving, or for return to after-sales service. The
interior and exterior packaging must be completely removed before using the device. The standards in force
in your country regarding environmental protection must be respected before destruction of the packaging.
3.3. Storage
ATTENTION
The device can be kept in stock but only in its original closed packaging.
Storage can be carried out in compliance with these conditions:
• Storage in a dry, non-humid room
• Sheltered from the sun
• Stock control for more than 2 months (general condition of the device and all the elements constituting it)
• No shaking of the material
• Storage in closed premises and not outside.
4. HARDWARE FEATURES
* Subject to change
Model
Temperature
Supply voltage
Dimensions (mm)
Weight
Accessories
Digital temperature regulator:
- The regulator is located on the back of the device
- There are two buttons to lower or increase the temperature
- The first liquid crystal indicator corresponds to the compressor, lit when the compressor
is on for cooling
- The second liquid crystal indicator corresponds to defrosting, lit when defrosting
automatic is on
- This key corresponds to LED lighting
CVRE145L
2-8°C
330W/220V/50Hz
L 704 x D 585 x H 887
71 kg
2 grid shelves
CVRE185L
2-8°C
450W/220V/50Hz
L 874 x D 585 x H 887 L 1,224 x D 585 x H 887
80 kg
2 grid shelves
CVRE225L
2-8°C
600W/220V/50Hz
104 kg
2 grid shelves
EN