Casselin CVRE145L Manual Del Usuario página 15

• During use, your hands must be dry.
EN
• Do not move or tilt the device during operation.
Manual :
- The device must be completely removed from its packaging. All protection must be completely removed.
- Place the appliance upright on a solid, flat surface. Never place the refrigerated display case on a flammable
surface. Place this machine to ensure optimal air circulation. We advise you to keep a minimum distance of
10 cm from the wall and other objects.
- Do not install this device near open fires or other heating devices.
- Do not install the device in a wet or humid place.
- The electrical cable must be protected at least 16 amps. The device must be plugged directly into a wall
outlet. Using a power strip will cause the device to trip.
- To avoid damage to the compressor, the device must not be tilted
more than 45° during transport or installation.
- Leave the device to rest for 2 hours before its first use.
- Before use, the device must be cleaned
- Plug in the device and press the ON button, choose the desired temperature. Do not add drinks until the
desired temperature has been reached.
- LCD indicator: the indicator light is on during the refrigeration phase and remains off as long as the
temperature of the refrigeration chamber is stable and flashes when the compressor remains off for too long.
- LCD defrost indicator: the device is equipped with automatic defrosting which is activated 4 times per 24
hours. The indicator light comes on during the defrosting phase and turns off at the end of defrosting. It
flashes when the appliance has not been defrosted for a long time.
- Manual defrosting is also possible if the efficiency of the refrigeration decreases, for example during
accidental opening.
- Any hot dish must be cooled before inserting it into the appliance.
- The height of the shelves must be adapted to the height of the dishes. Dishes should be properly spaced
to maximize the effect of refrigeration.
Digital temperature regulator:
2. Adjust the temperature: Press the button , the set temperature is displayed. Push the button Or
to modify and store the displayed value. Push the button to exit the setting and display the cold room
temperature.
2. If you do not press any other button within 10 seconds, the cold room temperature will be displayed.
3. Lighting: Press the button , it lights up; press again, it stops.
Manual defrost with stop/start:
Push the button and hold it for 6 seconds to defrost or stop defrosting.
4. Refrigeration LED: During refrigeration, the indicator light is on; When the cold room temperature is
constant, the indicator light is off; During delayed start, the indicator flashes.
5. Defrost LED: During defrosting, the LED is on; When defrosting stops, the LED is off. During the defrost
delay display, the LED flashes.