Mx Onda MX-VC2644 Manual De Usuario E Instalacion página 51

CONTROL PANEL
8
9
6
1. Power on / off
2. Selection of the cooking zone
3. Power of the cooking zone
4. Power level selector
5. Triple cooking zone control
USING THE TOUCH CONTROLS
The controls are responsive to touch, so no pressure is required.
Use the entire part of the fingertip, not the tip.
You will hear a beep each time a touch is detected.
Make sure the controls are always clean, dry and that there are no objects
(for example, a utensil or cloth) covering them. Even a thin layer of water
can make the controls difficult to operate.
USE OF THE CERAMIC HOB
To start cooking
1. Touch the on / off button 1.
When the hob is turned on, an acoustic warning will
sound and the displays will show the indications "-" or
" - -", warning that the hob is on and in standby or
standby status.
2. Place a suitable container for the chosen cooking
zone.
Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
3 2 3 2 3 2
6. Switching off the cooking zone
7. Control panel lock
8. Timer
9. Timer time
9
5 7
1
4