Publicidad
Idiomas disponibles
Idiomas disponibles
When the ceramic hob control panel is in lock mode, all buttons
are disabled except the on / off button 1. You can always turn off
the ceramic hob using the on / off button 1 in an emergency, then
you need to unlock the control panel.
OVERHEATING PROTECTION
Inside the ceramic hob, a temperature sensor is located, which is constantly
monitoring the operating temperature, when it is excessive and the built-in fans
are not capable of reducing the temperature, the hob will stop working
automatically.
AUTOMATIC SAFETY SHUTDOWN
It is a protection system that incorporates the ceramic hob, which automatically
turns off if you forget to turn it off.
The automatic shutdown time varies depending on the selected power, see the
following table:
Auto power off time (hours)
TIMER
Using the timer, it is possible to program the automatic switch-off of a cooking
zone. The timer can be set independently for each cooking zone and up to 99
minutes.
Using the timer to turn off a cooking zone
Note: The cooking zone that you want to time must be in operation.
1. Touch selection button 2 for the cooking zone you
want to time. The power indicator 3 of the selected
cooking zone will flash.
2. Touch the timer button 8 and the sleep time indicator 9
will show the default sleep time 30 minutes. The digit
corresponding to the tens will remain flashing for three
seconds.
3. To change the disconnection time ...
While the tens digit is flashing, touch the power
level selector 4 with your fingertip and slide your
finger left or right to decrease or increase the tens
of minutes. If you want to reset the tens, touch the
6 " 0 " button.
Power level
1
2
6
6
12
3
4
5
6 - 9
5
5
4
1,5
Publicidad
