Descargar Imprimir esta página

De Dietrich DRC1775ED Guia Del Usuario página 72

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Troubleshooting
Warning! If there is any anomaly, unplug your appliance. Only a qualified
electrician or competent person may carry out troubleshooting.
If there is any anomaly during operation, check the following points before calling our
approved after sales service or a qualified professional.
ERRO
MEANING
R
TYPE
E01
Sensor
warning
E02
Sensor
warning
E03
Sensor
warning
E06
Sensor
warning
E07
Sensor
warning
E08
Low
voltage
warning
E09
Freezer
compartment
is not cold
enough
WH
Y
Power supply to
the device has
dropped to below
170V.
Likely to occur
after long term
power failure.
WHAT TO
DO
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
Call Service for assistance as
soon as possible.
This is not a device failure, this error
-
helps to prevent damages to the
compressor.
The voltage needs to be increased
-
back to required levels.
If this warning continues, an
authorised technician needs to be
contacted.
Set the freezer temperature to a
1.
colder value or set Super Freeze.
This should remove the error code
once the required temperature has
been reached. Keep doors closed to
improve time taken to reach the
correct temperature.
Remove any products which have
2.
thawed/defrosted during this error.
They can be used within a short
period of time.
Do not add any fresh produce
3.
to the freezer compartment until
the correct temperature has been

Publicidad

loading