Publicidad
Idiomas disponibles
Idiomas disponibles
moment when the heart is beating and pumping blood through the body.
The diastolic pressure is the lowest pressure in an artery in the
moments between beats when the heart is resting.
1. Place a stethoscope on the patient's arm where there is a pulse.
Apply the cuff to the patient's upper arm and hold in place with Velcro.
3. After reaching the cuff pressure, the deflation begins. The operator
can adjust the inflation pressure if necessary. During the measurement,
press and hold
pressure.
4. The systolic pressure is measured when the operator first hears the
pulse. Take the reading according to the value on the display. This
reading indicates the patient's systolic pressure.
5. The diastolic pressure is measured from the moment the operator is
unable to hear the sound of the pulse. Take the reading according to
the value on the display. This reading indicates the patient's diastolic
pressure.
16
2. Press
number to appear. Press
to the auscultatory mode. A auscultatory
mode symbol will appear on the display
with a beep. The cuff begins to inflate
automatically.
at any time to keep inflating, release at the desired
and wait for the user
to switch
Publicidad
