Descargar Imprimir esta página

Faber GALILEO STRIPES F830 Manual De Uso página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
Value on
KW Notes
swipe key-
board
0
7.4 Standard initial setting
1
4.5
2
3.5
10. HOB FUNCTIONS
Lock
Child lock
Boost function
Cooking area timer
Timer (generic)
Melting
10
It is possible to lock the hob functions during use, e.g. to clean the hob.
To enable/disable: press
This function prevents accidental use of the appliance. This cannot be used during a cooking oper-
ation
To enable: press
, simultaneously press and release
All the digits that indicate
The operations described must be completed within 10 seconds.
To disable: press
, simultaneously press and release
All the digits that indicate
The operations described must be completed within 10 seconds.
Every cooking area can be set to an additional power level for a maximum of 10 minutes.
To enable: select one of the 4 cooking areas and select "Boost" on the swipe keyboard. The corres-
ponding digit indicates
To disable: select one of the other possible values on the swipe keyboard.
The timer allows a specific cooking area to be switched off when the set time expires.
The cooking areas can be programmed individually because each one has its own timer.
To enable: turn on the hob and select one of the 4 cooking areas, then press "+" and "-" to set the
timer. The symbol
of the cooking area lights up. Press "+" and "-" separately to set the count-
down. The increase and decrease of the value during the setting varies according to the time to be
set. The display in the time management controls area shows the countdown.
To confirm the set time, do not touch anything for 5 seconds.
To disable: wait until the end of the countdown or reset the time values (press "+" and "-" and reset
with "-").
Timer with alarm for generic use.
To enable: turn on the hob, then press "+" and "-" to set the timer. Press "+" and "-" separately to
set the countdown. The increase and decrease of the value during the setting varies according to
the time to be set. The display in the time management controls area shows the countdown.
To confirm the set time, do not touch anything for 5 seconds.
To disable: wait until the end of the countdown or reset the time values (press "+" and "-" and reset
with "-").
To enable: select one of the 4 cooking zones and press
The digit of the selected zone shows
To disable: press
3
Once the correct value has been
entered, confirm by pressing and hold-
ing
and
+
.
.
disappear.
.
.
or press
.
2.8
.
+
and then again
+
and then again
.
.
.

Publicidad

loading

Este manual también es adecuado para:

Galileo linear f8304300