Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION MANUAL
Ref. APP DINUY CONFIGURE
● This app allows you to configure one or any combination of the
following DINUY detectors: DM TEC B3B/B3N/B3P and
DM TEC B1B/B1N/B1P, in the following operating modes:
- Motion Detector;
- Presence Detector;
- Twilight Switch.
● The DINUY CONFIGURE application allows intuitive and quick
configuration of detectors. This configuration is done through
templates that can be edited, saved and duplicated.
● The use of the configuration App is recommended for exclusive use
by the installer or authorized installation personnel.
INSTALACIÓN DE LA APP
● Download the configuration App:
Play Store:
App Store:
● Once you have downloaded the DINUY Configure app from the
Google Play Store or Apple App Store, open the app, log in and
select DETECTORS. If this is the first time you access DINUY
CONFIGURE, you must Register as a new user.
Important! Internet connection is required for registration.
CREATION OF NEW TEMPLATE
To create a first template press the "+ NEW TEMPLATE" button.
This template has a default configuration. If you do not want to edit,
press SAVE and go on with the DETECTORS SETUP (3 STEPS)
section.
If you decide to edit, in each template you can modify the following
configuration parameters:
BASIC Menu:
● Operating mode:
- Motion Detector.
- Presence Detector.
- Twilight Switch.
● Timing: Between 1 second and 1hour.
● Brightness: Disabled, or between 5 and 2000 Lux.
● Sensitivity: Very low, Low, Medium, High, Very High.
ADVANCED Menu:
● Bluetooth Active Time: This is the time that the Bluetooth will
be open once you power the 230V~ detector or send the
parameter settings to the detector. After this time the Bluetooth
will be automatically deactivated. This time can be selected
from 10 minutes to 4 hours.
Factory setting 2 hours.
● Relay polarity:
Factory setting: NO.
- NO: Normally open when the relay is idle. When people are
present, the relay closes and activates the lighting.
- NC: Normally closed when the relay is idle. When people are
present, the relay opens and deactivates the lighting
(ultraviolet lamps and germicides).
● Lock Code: For greater security (default, Deactivate):
- Activate: Enter a 4-digit code to lock the detector.
- Deactivate: It does not have a lock code.
Additional security with Lock Code.
The configuration of each template will be applied to the detectors
you choose. You can create as many templates as the operating
modes you need.
Each template has buttons to edit its name, edit settings, delete and
duplicate
DETECTORS SETUP (3 STEPS)
To configure the detectors, you will need to create a new template or
use an existing one. Next:
STEP 1: SEARCH FOR DEVICES
Press the SEARCH button (see button indicated in the following
Image) on the template whose configuration you want to apply.
This action locates nearby detectors with Active Bluetooth:
IMPORTANT: By default, the detectors' Bluetooth will be Active
for 2 hours after receiving power. If you cannot locate the
detectors, try disconnecting and then reconnecting the power to the
detectors from the mains..
You Will see all the devices that are in the range with Active
Bluetooth, and that can be configured:
STEP 2: UNIQUE IDENTIFICATION
Press the IDENTIFY button to establish visual contact with a
specific detector. A red LED will start flashing on that detector
and the app will also identify that device with a flashing red dot.
In addition, the detector can be edited and named as desired.
STEP 3: APPLY SETTINGS
Next, select the detectors to which you want to apply these settings
and press SEND:
If the device configuration has been completed correctly, a
confirmation message will appear
The "Completed" message confirms that that detector has received
the configuration of that template correctly. In addition, there is
another confirmation with the double flashing of the luminaires that
have been connected to the detector.
DINUY configure
DINUY configure
(Android)
(iOS)
Publicidad
