Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Wall-Mount
Bracket to the Solid Concrete or
Concrete Block
400
400
WM1
WM5
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Monitor and is capable of
supporting a weight of at least four times
that of the TV or LCD Monitor.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
21.
• Refer to your TV's or LCD Monitor's
Reference Guide for the TV's or LCD
Monitor's weight.
300
300
WM1
− 14 (EN) −
Note
When your TV or LCD Monitor is installed on the
wall, the upper side of the TV or LCD Monitor
slightly leans forward.
We recommend you to check the position of TV
or LCD Monitor in the viewing environment.
2
Align
to the wall and
WM1
make four marks.
× 4
Note
Use a level to check whether
3
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV
or LCD Monitor.
Note
Pilot holes must be drilled to a depth of 75 mm,
using a 10 mm diameter drill bit.
WM1
WM1
is level.
× 4
ø 10 mm
75 mm
Publicidad
