Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMING THE TIMER
STEP 1: SET CLOCK
1) Turn dial to "SET CLOCK".
2) When hour-number is flashing, adjust it to your local hour time
with buttons "+" and "-", then press "OK" button to confirm.
3) Then minute-number would flash, also use "+" and "-" buttons
to adjust and use "OK" button to confirm.
Tips:
1) When both numbers stop flashing, press "+" or "-" can resume
flashing status.
2) Press and hold "+" or "-" button for 3 sec can adjust number
quickly.
3) At any time during adjusting time, press and hold "OK" button
for 3 sec, switch between 12-Hour and 24-Hour format.
AM/PM would disappear when in 24-Hour format.
-08-
Publicidad
