Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3: HOW LONG
1) Turn dial to "HOW LONG".
2) The default outlet is zone 1. When hour-number is flashing, use
"+" and "-" buttons to adjust it, and then press "OK" button to
confirm.
3) Then minute-number would flash, also use "+" and "-" buttons
to adjust and "OK" button to confirm it, then watering
duration time for zone 1 has been finished.
4) Press "Zone" button to switch to zone 2, and same operation
to adjust and confirm watering duration time for zone 2, zone
3 and zone 4.
Tips:
1) When both numbers stop flashing, press "+" or "-" can resume
flashing status.
2) Have no plan for a zone, you must set its duration time as 0 h
and 0 minute, then this zone won't work.
3) You can adjust the duration time from 0minute~3h 59minutes
for each zone.
4) Press and hold "+" or "-" button for 3 sec can adjust number
quickly.
-10-
Publicidad
