Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL THE TIMER ON THE FAUCET
Tips: If the timer connection to
the faucet or hose is loose or
leaking, wrap more Teflon tape
around the threads and align
the threads. If the faucet
threads won't tighten to the
bottom of the timer inlet, add a
rubber washer to make it
tighter.
Note：
Please do not use tools, only install the timer by hand.
When freezing temperatures are expected, timers should be
removed from the hose faucet and stored indoors to prevent
potential freeze damage.
Please install the filter properly and
keep it clean as follows.
1) Turn off the garden faucet.
2) Wrap Teflon Tape around the faucet threads.
3) Screw the timer to the garden faucet and
make the display is as vertical as possible to
the ground to prevent rainwater from
accumulating and leaking into the interior.
4) Wrap Teflon Tape around the threads of the
timer outlets.
5) Screw the garden hoses to the timer outlets.
6) Turn on the faucet after programming the
timer.
-06-
Rubber Washer
Publicidad
