Descargar Imprimir esta página

cecotec FAST&FURIOUS 9040 ABSOLUTE Manual De Instrucciones página 42

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
ENGLISH
6. Press the manual steam switch to release steam or press the automatic steam switch. At
this time, the iron knob can be adjusted.
There are 6 modes: Dry clothes, chemical fibre, silk, wool, cotton and linen. Select the desired
one according to the type of garment to be ironed.
Fig. 5
1.
Steam levels
2. Clothes drying
3. Fibre
4. Silk
5. Wool
6. Cotton
7.
Linen
Vertical steam ironing
1.
Hang the clothes or garment from the device.
2. Plug the appliance into a power supply. The device will beep and the lack of water and
descaling indicators will blink and turn off.
3. The operation light indicator will turn on and then enter standby mode. Press the main
switch, the operation light indicator will blink.
4. The device will start preheating, this process will take 110 seconds approximately. During
this process, no steam will be emitted.
5. Once the device is preheated, the operation light indicator will remain steady on.
6. For hanging curtains and clothes (coats, suits, jackets, etc.), use the vertical ironing
function. To do so, the iron is lifted and the steam is sprayed on the clothes.
7.
Spray back and forth several times to remove creases.
Warning
The iron will spray hot steam. Never try to use it on clothing that someone is wearing. Never
use steam on yourself or others.
After use
-
After using the device, turn it off from the main switch and unplug it from the power
supply.
-
Let the iron rest on its heel.
-
Wind the power cord around the base and fix it with the clamp.
-
Allow the machine to cool naturally before storing.
42
FAST&FURIOUS 9040 ABSOLUTE / FAST&FURIOUS 9050 X-TREME

Publicidad

loading

Este manual también es adecuado para:

Fast&furious 9050 x-treme0559505596