Publicidad
Idiomas disponibles
Idiomas disponibles
Note
When your TV or LCD Display is installed on the
wall, the upper side of the TV or LCD Display
slightly leans forward.
We recommend you to check the position of TV
or LCD Display in the viewing environment.
2
Align
to the wall and
WM1
make four marks.
× 4
Note
Use a level to check whether
3
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV
or LCD Display.
Note
Pilot holes must be drilled to a depth of 75 mm
(3 inch), using a 10 mm (13/32 inch) diameter drill
bit.
WM1
WM1
is level.
× 4
ø 10 mm
(13/32 inch)
75 mm
(3 inch)
− 15 (EN) −
4
5
Install
on the wall.
WM1
Note
Use a level to check whether
Precaution
Do not over-tighten lag bolts
tightening could reduce the holding power of lag
bolts
.
WS2
6
Pull out the arm of the bracket
to the end.
WA1
WM1
WW1
WS2
WM1
is level.
. Improper
WS2
EN
Publicidad
