7
Install
. (Wall-Mount Hole
WM5
Pattern: 400 × 400 mm only)
400
400
M4
WM5
− 16 (EN) −
Preparing for the Installation
of the TV or LCD Display
Note
Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
1
Attach the Table-Top Stand to
make the TV or LCD Display
standing.
• Refer to your TV's or LCD Display's Setup
Guide.
2
Remove the screws from the
rear of the TV or LCD Display.
3
Attach the Wall-Mount
Attachment
the TV or LCD Display) to the
rear of the TV or LCD Display (to
make it parallel with the wall).
VS
(supplied with
VS
1.5 N·m/1,5 N·m
{15 kgf·cm}