Kenwood KMR-XM500 Manual De Instrucciones página 10

SiriusXM® External Components
Reset to the default settings
1
Press and hold <
2
Press <E>/<F> to select [
Settings).
3
Turn the volume knob to select [Factory Reset],
then press the knob.
4
Turn the volume knob to select [SiriusXM], then
press the knob.
5
Turn the volume knob to select [Yes], then press
the knob.
10
> to display the settings.
] (General
External Components
Using external audio players
1
AUX OR SIRIUSXM
1 3.5 mm stereo mini plug to RCA plug (Sold
separately)
2 Portable audio player (Sold separately)
Ñ Starting playback
1
Connect an external component to the AUX
input terminal.
2
Press < > to display the HOME screen.
3
Turn the volume knob to select [AUX], then
press the knob.
4
Turn on the connected component and start
playing the source.
✎
NOTE
• To select the AUX source, it is necessary to set "AUX
Input" to "AUX" in [General Settings]. (P.3).
Camera
A reverse trigger is provided to activate the camera
when putting the vessel in reverse or you may
select the camera from the source menu.
Ñ Displaying the picture from the camera
The camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ To display the picture from the camera
manually
1
Press < > to display the HOME screen.
2
Turn the volume knob to select [Camera], then
press the knob.
2