Signature Sleep 1108222COM Instrucciones De Montaje página 30

STEP 20
First, make sure that your unit is still level in all directions.
Drill 1/8" (3mm) pilot holes
through the Upper Back Panel (G)
and Bottom Stringer (L)
at the stud locator marks.
Fasten the unit to the studs
in the wall with the Screws (3).
A step ladder will be
required.Do not lean
against the top of the
unit, it may cause
sagging
ameriwoodhome.com
(x8)
30
3
G
L