Signature Sleep 1000306COM Instrucciones De Montaje página 54

STEP 43
20r
(x4)
1. With a person on each side, carefully lift
the bed frame in the closed position.
2. While one person pushes the bed frame
into the cabinet, passed the 90 degrees,
the other person is to engage the "front"
Gas Piston (20h) on each side of the unit,
to the front pin of the Left and Right Pivot
Arm (20e & 20f).
3. Then tightly secure with two Nuts (20r).
4. To engage the "rear" Gas Piston (20h) on
each side of the unit, slowly and carefully
wiggle the bed frame back and forth until
you can insert the Gas Pistons (20h) onto
the rear pin of the Left and Right Pivot Arm
(20e & 20f).
5. Then tightly secure with two Nuts (20r).
20h
ameriwoodhome.com
20t
(x1)
20r
20r
push here
into cabinet
54