Ergomotion RIO 6.0 Manual De Instrucciones página 12

Remote Control Programming & Child Lock
This remote control is programmed with a Child Safety Lock function and three
programmable presets.
CHILD SAFETY LOCK
!
• LOCK: Press and hold FLAT and RAISE HEAD
(Side A) buttons for three (3) seconds. When the
backlight on the remote flashes twice, the lock is
completed; If any button is pressed while under
the lock status, the backlight on the remote will
flash twice.
• UNLOCK: Press and hold FLAT and RAISE
FEET buttons for three (3) seconds. When the
backlight on the remote flashes twice, the
unlock is completed and the remote will operate
normally.
*TO PROGRAM THE PRESET POSITIONS:
1. Articulate the head, foot and lumbar to your desired position.
2. Next, press and hold one of the preset buttons
seconds. The position is now saved.
NOTE: To restore the preset buttons back to their original
factory settings, hold FLAT and ZERO-G
at least 5 seconds. The original presets will be restored.
- 12 -
[• • •] for 5
simultaneously for
®