Hoover H-PURIFIER HHP75CAH011 Manual De Usuario página 11

GB
Fig. 15
10
When using H-Essence in certain settings or room environment, the GAS VOC level may change
due to the detection of the fragrances.
The Diffuser Function only works when the Air Quality LED Ring is on green color, it will pause
when the LED Ring is not green and continue working when it gets back to green.
The Diffuser function can only be used in AUTO & MAX modes and cannot be used in SLEEP
mode.
When activating the Diffuser function in AUTO mode, the main fan will work with a specific speed
to help to spread the H-Essence or the H-Biotics into the room.
Setting
SOFT
MEDIUM
SOFT
X1
CUSTOM
X2 MEDIUM
H-BIOTICS
X3
CUSTOM
X4 H-BIOTICS
X5
OFF
To switch off the function, press the diffuser button until OFF appears on the Display.
After each use of the Diffuser function, use a dry soft cloth to clean any residue from the product
surfaces.
To change the bottle in the diffuser unit, see 'Maintaining your H-Purifier' section.
HUMIDIFIER Function: [Fig. 15]
There are 3 different settings for the Humidifier function: MIN, MED & MAX. To activate this function
simply press the Humidifier button on the display, the default setting for this function is MIN. To select
any of the other settings simply consecutively press the button to change to the desired selection. The
button will illuminate white when switched on.
X1 MIN 40
MIN - Default Target Humidity 40%
X2 MED 55
MED - Default Target Humidity 55%
X3 MAX
70
MAX - Default Target Humidity 70%
OFF
X4
All 3 Target levels can be customised through the hOn app within a range of 30-80% Target Humidity.
To switch off the Humidifier function, press the humidifier button until OFF appears on the Display.
If the real time Humidity level is equal or higher than the one selected, a message will appear on the
display showing 'HUMIDITY REACHED'. The Humidifier Lamp will remain on.
The product will automatically activate the Humidifier function when the real time Humidity drops below
the selected target level.
The Humidifier function can only be used in SLEEP & AUTO modes and cannot be used in MAX mode.
REFILL ALERT:
When water level is lower than the minimum level, the display will show REFILL WATER message
blinking. For instructions see Maintaing your Purifier section.
Important Note:
• When the product is working in Diffuser Function: If Humidifier Function is selected without
turning off Diffuser Function, the product will automatically stop Diffuser Function and start
Humidifier Function.
• When the product is working in Humidifier Function: If Diffuser Function is selected without
turning off Humidifier Function, the product will automatically stop Humidifier Function and start
Diffuser Function.
Diffusing Timing
for 10 sec every 5 min
for 90 sec every 3.5 min
User Defined
for 2 min every 4 min
Cycle max duration
6 hours
6 hours
6 hours
6 hours