Turn the stand clockwise until you
hear it click into place.
Finally, screw the fastening nut
back onto the thread and tighten
the fastening nut hand-tight.
Position the appliance with a minimum distance of 30 cm from walls and ob-
jects.
.. Inserting the battery in the remote control
On delivery the battery is already inserted in the remote control. The remote control
requires a 3 V button cell battery, CR2025.
To activate it, pull out the insulating strip on the underside of the remote con-
trol.
Replace the battery if the appliance fails to react to commands from the remote
control properly.
WARNING!
Risk of explosion if batteries are replaced incorrectly.
Do not throw the battery into a fire.
Only replace batteries with the same type or an
equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufac-
turer's specifications.
DE
FR
NL
ES
IT
EN
129