Publicidad
Idiomas disponibles
Idiomas disponibles
•
Remember to unplug the evaporative cooler before servicing.
•
Do not plug in the evaporative cooler unless all parts and media are securely in place.
•
If you have a special safety outlet (GFCI), it's important to test it once a month to ensure it's working correctly.
This is a quick check to keep you safe.
•
Always pull on the plug, not the cord, when unplugging the evaporative cooler. This prevents damage to the
cord over time.
•
Keep your evaporative cooler away from anything that has open flames or may cause sparks.
•
When cleaning your evaporative cooler, make sure the unit is off and unplugged.
•
Do Not Use This Fan with Any Solid-State Speed Control Device.
•
Do not use an extension cord with this product if used outdoors.
•
If used indoors, extension cords are okay to use but not recommended. If you must use one, ensure it meets
the cord requirements.
◦ Use properly grounded 14 AWG or greater for APEX 500 through APEX 4000
◦ Use properly grounded 12 AWG or greater for APEX 6500
◦ Extension cord must not exceed 50 feet (15.24 meters) in length
◦ Extension cord must be properly grounded
•
Be careful when moving your evaporative cooler with a full tank of water; only transport it on all four caster
wheels, and do not tilt the evaporative cooler forward or backward.
SAFETY
3
Publicidad
