installation
instructions
Ful! Size Tumble
Action
Washers
Before
beginning
installation,
carefully
read
these
instructions.
This will
simpfify
the
installation
and ensure the washer
is installed
correctly
and safely. Leave these instructions
near the washer
after installation
for future
reference.
NOTE:
The electrical
service
to the
washer
must
conform
with
local
codes
and
ordinances
and
the latest
edition
of the National
Electrical
Code,
ANS!/NFPA
70.
For your safety the information
in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Clear the room, building or area of all
occupants.
• Immediately
call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
• If you cannot reach your gas supplier, call
the fire department.
Installation
and service must be performed
by a
qualified
installer,
service agency
or the gas
supplier.
Printed in U.S.A.
Contents
SUBJECT
PAGE
Pre-lnstallation Requirements
2
Electrical Requirements
2
Grounding Requirements
2
Water Supply Requirements
2
Drain Requirements
2
Rough-In Dimensions
3
Location Of Your Washer
4
Unpacking
4
Installation
5-6
Replacement Parts
6
P/N 134850100 (0701)