BEARWARE 305273 Manual Del Usuario página 22

11. Projection
Press the "UP" button once in time mode to switch on the projection (light), and
then press it again to adjust the brightness of the projection. The setting sequence
is: light - medium - off (default setting is "off").
If the projection is switched on, press and hold the "UP" button to rotate the pro-
jection view. Press and hold the "UP" button to rotate the projection by 180 de-
grees.
Note: The projection function does not work in battery mode.
12. Dimming the display
Press the "SNOOZE / DIMMER" button briefly in time mode to adjust the brightness
of the LED display. The adjustment options are as follows:
Light - medium - dark - off
Press and hold the "SNOOZE / DIMMER" button for about 3 seconds to switch the
automatic mode on / off. If "ON" is selected, it means that the LED display auto-
matically changes to the low brightness mode if the surrounding is dark. If "OFF"
is selected, then the brightness can only be adjusted manually (default is "OFF").
Note: If you want to activate this function, then you should not be in the radio
mode.
13. Night mode
The night mode means that the LED display automatically changes to low bright-
ness mode at night or during a preset time period.
22
English