Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING
It is possible to mount the Smart Plug on a wall using the mounting
holes located on the back side of the device. Use hardware that is
adapted to the mounting surface. See mounting diagram at the end
of this document.
USING THE SMART PLUG
The Smart Plug can be used to:
• Control the filter pump
Example operation: weekly programming of the filtration system
• Control the pool's lighting
(the light transfromer is actually plugged to the Smart Plug). It
is compatible with any white light and is also able to manage
colours of LED lights using AstralPool® / Gre® LumiPlus RGB or
Zodiac® NL protocols).
Example operation: weekly programming and colour selection
Access to the entire range of the Smart Plug functions can
only be obtained through the Fluidra Pool app.
Button
Button
Description
Press to manually turn the output on/off.
Press for 20 seconds to reset factory defaults.
Status indicator
Color
Status
Flashes 1 time
Green
On
Off
Blue
Fast flashing
Red
On for 5s
Description
Connected to power supply
Power output on
Power output off
Firmware update in progress
Factory reset
E N
1 1
Publicidad
