Publicidad
Idiomas disponibles
Idiomas disponibles
EN
What is included in the box
Supply of this TV includes following parts:
•
1x TV
•
1x Remote control
•
2x AAA batteries
•
1x Mini Component adapter
cable
•
1x Mini SCART adapter cable
Attaching the Stand
Please follow the instructions on last page of this user manual.
Getting started - initial set up
1.
Insert the batteries supplied into the Remote control.
2.
Using the RF cable supplied, connect the TV to the TV Aerial wall
socket.
3.
For connecting to the Internet with a wired connection connect a
Cat 5/Ethernet cable (not included) from the TV to your broadband
modem/router. If you wish to connect to internet via Wi-Fi, please
follow instruction in electronic INSTALLATION GUIDE (point 7, STEP2
bellow).
4.
Connect the power cable to the Electrical outlet. You will be now
welcomed with the First Time Installation screen.
5.
If it does not appear, press and hold TV control stick on TV back cover until
special menu appears. Choose option Pair Again. Please press and hold
the blue and yellow buttons for a few seconds on the remote control,
until white LED on TV front blinked fi ve times. Press [MENU] then 8-8-
8-8 and the First Time Installation screen will appear.
6.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
7.
Please set desired settings in INSTALLATION GUIDE.
STEP 1 - Set the TV Menu language.
STEP 2 - Set type of network connection. If you wish to skip this step
and connect TV to network later, please choose Skip Network Setting
STEP 3 - Select the location of TV. For home use, please select Home.
For shop demonstration mode, set Store.
STEP 4 - Choose Digital TV tuning options:
DVB Antenna - You can choose between Terrestrial (DVB-T), Cable
(DVB-C) or Satellite (DVB-S).
Tunning Mode - Choose if you want to tune only Digital (DTV)
Analogue (ATV) or both Digital and Analogue (DTV + ATV)
Country - Set the desired country.
Operator - Select Cable provider. If your cable operator is not listed
select Others. (Avaliable only if DVB Antenna is set to CABLE)
8.
Choose [Auto Start] item and press [OK] button to start the tuning
process.
9.
Optional channel presets DVB-C:
Keep all default settings as recommended.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform a new search. Press the [MENU], select
"Network ID" and enter the network ID.
•
1x RF cable
•
1x TV stand installation packet
& screw set for wallmount
•
1x User guide
•
1x Mini Composite adapter
cable
Choose [Auto Tuning] item and press [OK] button to start the
tuning process.
10. Optional channel presets DVB-S2: Select "Satellite" in the "DVB
Antenna" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system.
Confi rm with [OK] button on the remote control, to start scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.
Remote control
Radio controlled remote control - No more aiming in the TV direction!
Refer to remote control picture on the second page of this user
manual.
1.
STANDBY – Switch on TV when in standby or vice versa.
2.
NET+ – Displays AQUOS NET+ menu.
3.
MUTE – Mute the sound or vice versa.
4.
0 – 9 – to select a TV channel directly.
5.
YouTube – Displays YouTube application.
6.
SMART – Displays SMART MEDIA menu.
7.
SOURCE – To display the input/source menu.
8.
TV GUIDE – Opens the 7 Day TV Guide (Digital mode).
9.
– To return to the previous channel viewed.
10. DTV – Switch to digital TV source.
11. VOL ▲/▼ – To increase / decrease the sound level.
12. FAV – To display favourites menu.
13. INFO – Press once for now/next channel information. Press twice for
programme information about current programme.
14. CH ▲/▼ – To increase or decrease the channel being watched.
15. SUBTITLE – To switch the dialogue at the bottom of the screen (on/
off ).
16. TELETEXT – Teletext mode - To enter Teletext
17. MENU – To display OSD menu.
18. BACK – Back to previous menu.
19. EXIT – To exit all menus.
20. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and
adjust the system settings to your preference. Press▲ to change
picture mode during watching TV. Press ▼ to change sound mode
during watching TV.
21.
– To play in fast rewind mode.
22.
– To play in fast forward mode.
23.
– To play/pause
1
24. Rec
– PVR Record
25.
– To restart the current chapter
26.
– To advance forward to the next chapter
27.
– To stop the playback
1
28. Rec List
– Opens the list of recordings.
29. COLOUR BUTTONS – Additional teletext and OSD functions
1
- available only with PVR function
Publicidad
