Publicidad
Idiomas disponibles
Idiomas disponibles
5. Attach the hose connector to the outlet on the product. Adjust the length of the exhaust
hose and make sure the hose is not bent. Place the product near an electrical outlet, as
shown in image 5. Adjust the grille to the desired angle and turn on the product.
6. The full length of the exhaust hose is 1.5 m. Keep the hose as short and as straight as
possible for best results, as shown in image 6.
Note
◊
Do not replace or extend the exhaust hose, this will result in reduced efficiency and worse,
cause the product to shut down due to insufficient back pressure.
◊
Place the product close to a window.
◊
When choosing the location of the product, make sure there is at least 50 cm of space
around the product.
◊
Open the window slightly so that there is enough room for the slider.
◊
A poorly placed air conditioner has little effect and will not work optimally. Make sure all
doors and windows are closed during operation.
◊
Do not force the caster wheels to move across carpeting or try to move the product when
it is in operation. This may cause the product to tip over and spill water, which may cause a
dangerous situation.
◊
Do not allow the exhaust hose to bend sharply.
3
1
4
English
5
2
6
37
Publicidad
