Publicidad
Idiomas disponibles
Idiomas disponibles
2
5
Connect one hose 5 of the Solar Heating Mat to
the pump outlet. Insert the hose adapter 2 to the
opening of the other hose 5 and then connect to
the pool inlet.
Turn the knob of the control valve 1 to divert
the water to the solar
1. First, unplug the filter pump. Turn the handle of the Valve Body to stop water from flowing into the Solar Heater Mat.
2. Reverse the steps of installation to disconnect the Water Hoses from the Solar Heater Mat.
3. Reconnect the Water Hose from your pump outlet to the pool return fitting.
4. Squeezee the water out from the Solar Heater Mat.
5. Clean and dry all parts before storage.
1. Check the hose connections to make sure there is no leakage of water.
2. It is suggested to bypass the Solar Heater Mat when the desired water temperature is reached.
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
16
8
5
Connect the threaded fitting adapters 8 to the
pump outlet and pool inlet. Connect one hose 5 of
the Solar Heating Mat to the threaded fitting adapters
8 at the pump outlet and the other hose 5 to the
threaded fitting adapters○8 at the pool outlet.
20
DISASSEMBLY AND STORAGE
MAINTENANCE
MST. Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
17
Remove the plug or open the shut-off valves.
18
Turn on the pump by pressing the power switch
or plug to an electrical outlet.
19
Publicidad
