osann Juntos Manual Del Usuario página 19

14) Fold the pushchair
with sports buggy
attachment, forward facing
Note: Apply the parking brake before each folding
operation and lock the front wheels (see point 8).
Fold the leg support into the horizontal position, set
the canopy to the lowest height setting and fold it
backwards. Now use the lever to fold the backrest
forwards onto the leg support. Push the slider (u)
on the push handle to the left and hold it down to-
gether with the button (h) for adjusting the height of
the slider. In one smooth movement, briefl y lift the
slider slightly and then press it down fully so that
the folding mechanism is released and the push-
chair folds in.
15) Folding the
pushchair with pushchair attachment,
rear facing
Note: Apply the parking brake before each folding
operation and lock the front wheels (see point 8).
Move the canopy to the lowest height setting and
fold it backwards. Now fold the leg support verti-
cally upwards and the backrest to the horizontal
position using the lever. Then fold the leg support
towards the backrest again.
Push the slider (u) on the push handle to the left
and hold it down together with the button (h) for
adjusting the height of the slider. In one smooth
movement, briefl y lift the slider slightly and then
press it down fully so that the folding mechanism is
released and the pushchair folds in.
16) Pushchair
When folded, provided the front wheels are locked
and aligned straight and the height of the push bar
is adjusted to your requirements, you can pull the
pushchair behind you like a trolley. Make sure that
no textiles can rub against the fl oor and be dam-
aged.
17) Use with carrycot
Place the carrycot on the frame and make sure that
the carrycot is fully engaged.
To detach the carrycot from the frame, press the
button (A) on both sides of the carrycot and lift it
out of the holder.
Attention: It is not possible to fold the frame with
the carrycot. Remove the carrycot before folding.
Note: Always apply the parking brake before folding.
- 19 -
18) Use with baby seat (optional)
First put the baby seat adapters onto the frame
and make sure that they are fully engaged. Then
place the baby seat on the adapters attached to
the frame and again make sure that the baby seat is
fully engaged. The baby seat is not included. Please
also refer to the baby seat instruction manual for
how to install and remove with a pushchair and
adapters.
Never use the baby seat with the adapters when
facing forwards! The baby seat must always be
mounted so that they are facing the push handle.
To detach the infant car seat adapter from the
frame, press the button (A) on the adapter and pull
it off the frame. Repeat the process on the other
side.
Attention: It is not possible to fold the frame with
the baby seat. Remove the baby seat and adapter
before folding.
EN