Parts And Features - Hamilton Beach Summit HBH850 Manual De Uso

Parts and Features

The parts and features for the Summit blenders are shown on this page. Become familiar with all parts and features
before using your blender. For questions, call Technical Service at 1-866-285-1087 (U.S. and Canada) or
910-693-4277 (all others) or visit our web site at:
NOTICE: Ensure the Quiet Shield
bottom edges of the Quiet Shield
installed improperly, thereby resulting in breakage of upper base housing, please call HB Commercial Technical
Services at 1-866-285-1087 (U.S. and Canada) or 910-693-4277 (all others) to purchase a repair kit.
Jar cover/
filler cap
Jar and
cutter
assembly
Circuit breaker/
reset switch
Jar pad
Control
panel
Sealing
gasket
Lower
base
housing
(above counter model)
4
www.commercial.hamiltonbeach.com
™ is installed correctly. Breakage can occur if the dovetail joints along the
™ are not properly interlocked with the upper base housing. If the Quiet Shield
Quiet Shield™
Thumbscrews
ON (I) / OFF (O) switch
(placement may vary
Upper base
on select models)
housing
USB port
To Load Custom Programs with
the USB Port:
1. Turn off and unplug unit.
2. Remove the USB port cover.
3. Insert USB card.
4. Plug in unit and turn on.
5. Display will show a confirmation
message.
6. Turn off and unplug unit.
7. Remove USB card and reinstall
the USB port cover.
™ is