Aiwa CX-NMT70 Manual De Instrucciones página 11

RANDOM /REPEAT PLAY
Use the remote control
RANDOM play
All the tracks on the selected disc or on all the discs can be
played randomly,
REPEAT play
A single disc or all the discs can be played repeatedly.
Press the RANDOM/REPEAT button.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — c& lights up on the display,
RANDOM/REPEAT play — RANDOM and ~ light up on the
display,
Cancel — RANDOM and = go out from the display,
To play the programmed tracks repeatedly
After programming the tracks, press the RANDOM/REPEAT
button repeatedly until c& appears on the display.
EE33
During random play following operations are not possible:
-to select the tracks directly with the numbered buttons.
-to skip to the previously played track with the + button.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from any of the inserted
discs.
Use the remote control.
1
2
Press the PRGM button twice in stop mode.
The IPRGM indicator lights up on the display.
r 'R'"
* When the PRGM button is pressed once in step 1, the unit
enters the KARAOKE PROGRAM (see page 20).
Press the DISC DIRECT PLAY button, then press
one of the numbered buttons 1 to 3 within 3
seconds to select a disc.
The selected disc is indicated in red on the display.
3 Press the numbered buttons and the +-1O button
to program a track.
Example:
To select the 25th track, press the +10, +1 O andl 5 buttons,
To select the 10th track, press the +1 O and O buttons,
Total playing time of
Program number
the selected tracks
Selected track number
Total number cjf
selected tracks
4 Repeat steps 2 and :3to program other tracks.
5 Press the <F button to start play.
To check the program
Each time the + or > button is pressed in stop mc)de, a
disc number, track number, and program number will bs
displayed,
To clear the program
Press the CLEAR button in stop mode.
To add tracks to the proglram
Repeat steps 2 and 3 in stop Imode. The track will be Iprogrammed
after the last track.
To change the programmed tracks
Clear the program and
repei~t
all the steps again.
To play all discs,
press the <> button to start play.
To play a single disc,
press the DISC DIRECT F)LAY buttorl,
m
then press one of the numbered buttons (1 -3) within 3 seconds
to start play,
m
During programmed play, yoLi cannot perform random play, check
the remaining time, and select a disc or track.
Go to the next step when the tray stops rotating
E,hfGL/SH
1()