Publicidad
Idiomas disponibles
Idiomas disponibles
DUBBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
1,4
2
EE'H3
Set the tape to the point where recording
will start.
The reverse
mode is automatically
set to 1.
Note that recording
will be done on one side of the tape only,
1
2
3
4
5
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
Press the DOLBY NR button to turn off the Dolby
NR.
Do
NR on the display
goes out.
Press
the TAPE/DECK
1/2 button
to select
deck 1.
"TP 1" is displayed.
Press the
REC/REC
MUTE
button
to start
recording.
Playing
and recording
start simultaneously.
To stop dubbing
Press the
button.
To
set the Dolby NR when playing back the dubbed tape
Press the DOLBY
NR button
and turn Dolby
NR on or off to
match thle original
tape.
-
'd
This function
allows
you to make exact cc)pies of both sicles of
the original
tape.
The
reverse
side
of Iboth tapes
will start
simultaneously
as soon as the longer tape has been reversed.
c Dubbing
does not start from a point halfway
in the tape.
The reverse
mode is automatically
set to 1),
The Dolby NR does not affect recording.
1
2
3
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
[m
Press the SYNC DUB button once or twice to start
recording.
@
For recording at normal speed,
press it once to displa!/
NORM-DUB.
@
For recording at high speed, press
it twice to display
HIGH-DUB,
o
@
The tapes are rewound
to the beginning
of the front sides,
and recording
starts.
To stop
dubbing
Press the W button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY
NR buttcn
and turn Dolby
NR on or off to
match the original
tape.
Recording
does not start, if tlhe erasure
prevention
tab on either
side of the tape is broken off.
EPIGLISH
14
Publicidad
