Airthereal Hydrozone AH20K Manual Del Usuario página 7

OPERATING INSTRUCTION
After plugging in the unit, there will be a beep sound. This means that the unit is powered on but is
in standby mode until the water flow is active. Use COLD water only.
When water flow is active, the unit will start to work at High Ozone mode by default and both indicators
will display a BLUE light. Press the Ozone level button to choose different levels of ozone.
Ozone level Ozone Level Indicator
High Blue Light (default)
Low Green Light
No Ozone No Light
When the water flow stops, the unit will return to standby mode.
NOTE: If you have hard tap water, we recommend installing a prefilter directly before the unit to
preserve the service life of your ozone generator and reduce maintenance.
Desiccant Dryer
The Desiccant Dryer is designed to remove moisture from the air flowing into the product, which
helps to ensure optimum performance.
• Before use, tear off the sticker on the top of the desiccant dryer.
• When the mode indicator displays red, it is a reminder to replace the desiccant. Use the attached
wrench to take out the desiccant in a counter-clockwise direction. Insert a new desiccant pack,
ensuring to align the slots and screw it in clockwise. You can feel it stick in place when fully installed.
Install
Take out
6
Use for
For heavily soiled or white clothes. For especially
tough stains, we suggest that you pre-treat stains
as you normally would.
For normal everyday clothes and mixed color loads.
Add a small amount of detergent or none at all.
Choose to run the washing machine without ozone.
The bottom
of the desiccant The desiccant slot
of the unit