Edesa EDW-4710 WH /A Manual De Instrucciones página 92

ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
Codes Meanings
Longer inlet time.
E1
Not reaching required
E3
temperature.
E4
Overflow.
Failure of orientation
E8
of distributary valve.
Keep pressing a button
E9
more than 30 seconds.
Washing control system
Ec
fail
Failure of communication
between main
Ed
with display
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
EN
.
circuit board
circuit board
Possible Causes
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of distributary valve.
Water or something on the button.
PCB or motor fail.
Open circuit or break wiring for the
communication.
.
17