EN
2. Make sure you select the correct device from the drop-down menu
corresponding to the device plugged-in (e.g. choose "Headset" if you have
plugged-in a headset and do not choose "Headphone" in this case),
and then click OK to save the setting.
3. If you are plugging in a microphone then use the Microphone-In Jack,
and do not use the combination audio jack.
System Map:
Bottom & Rear Views
2
3
1
1. Vent
2. RJ-45 LAN Jack
3. Speakers
4. USB 3.2 Gen 2 Type-C Port
16
1
4
5 6
7
3
Figure 4 -
Bottom & Rear Views
1
5. HDMI-Out Port
6. Mini DisplayPort 1.4
7. DC-In Jack