Monster A5 V21.3 Manual De Usuario página 24

EN
Driver Installation General Guidelines
As a general guide follow the default on-screen instructions for each driver (e.g.
Next > Next > Finish) unless you are an advanced user. In many cases a restart is
required to install the driver. Make sure any modules (e.g. WLAN or Bluetooth)
are ON before installing the appropriate driver.
Wireless LAN Module
Make sure the Wireless LAN module is turned on (and not in Airplane Mode)
before configuration begins.
WLAN Configuration in Windows
1. Click the icon
2. Click the icon
3. A list of available access points will appear.
4. Double-click an access point to connect to it (or click it and click Connect).
5. Enter a network security key (password) if required, and click Next.
6. You can choose to find other devices or not.
7. When you are connected to the network access point it will display Connected.
8. Select any connected network and click Disconnect to disconnect from a
connected access point.
9. You can click the Airplane Mode button to turn the mode On or Off.
10. Alternatively you can click the Wi-Fi button to turn just the Wi-Fi On or Off.
Connect Automatically
It is recommended that you check the box to Connect automatically.
This will cause the system to check for the access point upon startup,
and resuming from a power-saving state, and will remove any necessity to
keep connecting manually.
24
in the notification area of the taskbar.
.